Setting up a Netgear WiFi range extender in the house seems useless when you are unable to connect your devices to WiFi. In this post, we will try to address the situation when the Netgear WiFi extender not connect with smart TV. Before taking any further steps, we recommend verifying whether the issue is specific to your TV or if every WiFi device in your home is unable to connect to Netgear_ext.
Just in case all of your devices can’t connect to the Netgear extender, then power cycling can work like magic. Well, if you doubt the ability of the process, then let us tell you that rebooting is one of the finest hacks that help in getting rid of unexpected minor bugs that impact the performance of the device. Hence, proceed to restart the range extender and check if your devices can successfully connect to the extender’s internet connection.
But, what if it is only your TV that is unable to get connected to the extender? In that scenario, walking through the hacks cited below is required. Yet, it’s essential to acquaint yourself with the potential causes of the issue we are addressing. Keep reading.
WiFi Extender Can’t Connect with Smart TV [Why]
Here are the reasons why your WiFi extender is denying connection with your smart TV:
I. Incorrect WiFi Password
If you are unable to create a connection between your smart TV and the range extender, then there is a high possibility that you are using the wrong WiFi password. Perhaps, you are using the mywifiext.net login password to connect the TV to the extender’s WiFi.
II. Heavy Network Traffic
Chances are that too many devices are accessing the network of your wireless range extender due to which there is no window left for your TV to establish a connection. It can happen if you’ve set the network traffic limit on your Netgear range extender.
III. Too Much Signal Interference
The second reason your Netgear WiFi extender not connect with smart TV is the presence of interference-creating factors near the extender. Understand that WiFi signals propagate in wave form.If there are a lot of hindrances in the path of signals approaching your smart TV, connecting it to the WiFi extender will become a task next to impossible.
Hence, these were the potential reasons for the failure in the connection between your WiFi devices. Considering that you’ve walked through them carefully, let’s now focus on the hacks that can help you fix the situation easily.
How to Fix Netgear WiFi Extender not Connect with Smart TV
I. Use the Correct WiFi Password
Start troubleshooting the issue by re-entering the WiFi password of your range extender.Enabling the “Show Password” option is advisable, enhancing the accuracy of password entry by preventing typing errors. If your WiFi password consists solely of lowercase characters, ensure the Caps Lock option is disabled.
II. Disconnect Other Devices
To address the issue of the WiFi extender not connecting with the smart TV, try disconnecting other devices accessing the network, leaving only your TV connected. Additionally, visit mywifiext.net or mywifiext.local to adjust the limit for devices allowed to access your extender’s WiFi network.
III. Remove WiFi Interference
If the path of the signals approaching your smart TV is filled with hindrances like mirrors, aquariums, Bluetooth speakers, baby monitors, and microwave ovens, then it is suggested that you remove some of them. The reason is, they can block or deviate the WiFi signals transmitted by your range extender thereby creating connection problems.
WiFi Extender Can’t Connect with Smart TV [Precautions]
After following the hacks provided in the previous section, you will be able to connect your smart TV to the Netgear extender. However, the outdated software of your smart TV can also create such problems. Therefore, after resolving the issue, it is recommended to update the software on your smart TV.
Just in case your Netgear WiFi extender not connect with smart TV even after giving a shot at the hacks given above, you must go for an Ethernet connection and upgrade the smart TV software after that. But, remember to use a non-damaged cable. Additionally, ensure that the Ethernet connection is securely tightened, and verify that the ports on both your TV and extender are functioning properly.
You must also ensure that your smart TV and range extender are running in the same time zone. To achieve this, adjust your TV’s date and time settings to align with the designated time zone. Simply, go to TV Settings, and select General System Manager. Thereafter, select Time > Clock and set the time, date, and time zone. However, these settings may vary according to the smart TV you own.
That’s all about what to do if your Netgear WiFi extender not connect with smart TV. We trust that you can resolve the issue you are encountering. However, such problems may arise with any device present in your home network. To prevent connectivity problems, we advise you to upgrade the extender’s firmware by accessing the IP address 192.168.1.250.
But, keep in mind to upload the firmware file as per the model number of your extender. Besides, avoid interrupting the firmware update process.
Read More: Netgear WiFi extender with Ethernet port
Certainly! Opt for a high-quality Ethernet cable like Cat6 or Cat7 for optimal performance and stability.
Access the Netgear Extender’s settings via the web interface (usually 192.168.1.250) and navigate to the firmware section to check for updates.
Yes, each extender has a device limit. Visit mywifiext.net or mywifiext.local to adjust the limit if needed.
Yes, remove potential sources of interference like Bluetooth devices or microwaves for a smoother connection.
Absolutely, ensure your Smart TV’s software is up-to-date to avoid compatibility issues.
Consider an Ethernet connection and upgrade the TV’s software. Ensure the cable is undamaged, and the connections are secure.