You are currently viewing Unable to Connect Netgear Extender to New Router? Let’s Provide Assistance!

Unable to Connect Netgear Extender to New Router? Let’s Provide Assistance!

So, you’ve got a Netgear range extender set up in your home and have opted to upgrade your existing router with a new one. But why the concern? Are you encountering difficulties in linking your range extender to the new router? Fret not, as tackling this task is not as formidable as it may seem. All you need to do is pay attention to specific details when establishing a connection between these two devices. Walk through the points discussed in this post and learn what should be done while you connect Netgear extender to new router.

To make things even more accessible for you, we’ve outlined the essential steps to complete the connection process in case you’re unfamiliar with them. Dive into the details below to ensure a seamless connection between your Netgear extender and the new router. Keep reading!

Starting Fresh: Resetting Your Extender for a Seamless Connection

Certainly, if you’re experiencing difficulty in establishing a connection between your WiFi range extender and the new router, the likely issue is that the extender is still trying to enhance signals from your previous router, which no longer exist in the new configuration. This happens because the extender retains the settings of the previous router. The solution? Reset your extender to its default factory mode. The steps outlined below will guide you through the process of resetting the extender, ensuring a smooth connection to the new router:

  • Ensure that no device is currently connected to the WiFi extender’s network.
  • Find the RESET button on the extender, typically located in a labeled hole on the back panel.
  • Using a sharp object, press and hold the RESET button for 15-30 seconds before releasing it.
  • Your extender will reset, wiping out previous configurations.

With your WiFi range extender now reset to its default factory settings, you’re ready to connect Netgear extender to new router. But before you dive into the process, make sure to prepare a few essentials. Consult the list below to ensure a smooth setup:

Essentials for a Seamless Extender-Router connection

1. A functioning LAN cable without any damage.

2. The WiFi password and SSID of your recently installed router.

3. An updated web browser for optimal performance.

4. The default login credentials (username and password) of your Netgear extender.

5. The SSID and password specific to your range extender.

Moving forward, let’s delve into the steps to establish a connection between your Netgear extender and the new router. Notably, a successful link can be established by accessing, the web address designed for entry into the Netgear extender’s management panel. Explore the following section to understand how to leverage this URL for connecting the extender to the new router.

How Do I Connect Netgear Extender to New Router?

Before we dive into the connection process, ensure that your WiFi router is already set up and configured. Once your new router is ready, proceed with the following steps:

1. Position your extender in close proximity to the new router.

2. Power down the router.

3. Utilize a LAN cable to connect the LAN port of your router with the Internet port of your extender.

4. Wait for 10 minutes and then power on the router.

5. Power on your WiFi range extender.

6. Once the LED lights on your extender stabilize, turn on your computer.

7. Connect your computer to the extender’s WiFi using the provided SSID and network key.

8. Launch a web browser and navigate to

   – For Mac devices, visit mywifiext.local.

9. If the login page appears, enter the default credentials of the extender.

10. The New Extender Setup page will be displayed.

11. Choose between setting up the extender in AP mode or Extender mode.

12. The subsequent screen will prompt you to assign a new SSID and WiFi password for the 2.4GHz and 5GHz bands.

13. Follow the on-screen instructions to set the password for your extender.

14. Continue following prompts until you reach the BASIC Home screen.

Read More: Netgear 5GHz Not Working 

Netgear Smart Connect: A Guide to Enable or Disable 


How Can I Reset My Netgear Extender to Factory Settings?

To reset your Netgear Extender, locate the reset button (usually on the side) and hold it down for 10 seconds. This restores the extender to its factory settings.

What Should I Do if the Extender Keeps Disconnecting?

Check for interference, update firmware, and ensure the extender is placed within an optimal range. If issues persist, contact Netgear support for further assistance.

Can I Connect Multiple Devices to the Extender?

Yes, Netgear Extenders support multiple devices. Configure the extender once, and it will enhance the coverage for all connected devices.

Do I Need a Professional Technician to Set Up the Extender?

No, the setup process is user-friendly. Follow the provided instructions or visit Netgear’s website for step-by-step guides. If issues arise, seek assistance through customer support.

Is It Possible to Connect the Extender to a Guest Network?

Yes, Netgear Extenders can be connected to guest networks. Access your extender’s settings to configure it for guest network usage.

What Should I Do if the Extender Doesn’t Recognize My New Router?

Ensure both devices are compatible and update firmware on both the extender and router. If problems persist, reach out to Netgear’s customer support for tailored solutions.


Navigating the complexities to Connect Netgear Extender to new router requires patience and a systematic approach. By following our expert tips and addressing common challenges, you’ll soon enjoy an extended and reliable network coverage.

Leave a Reply